A comparative analysis of pulp-derived nanocelluloses for 3D bioprinting facial cartilages.

Nanocelluloses have attracted significant interest in the field of bioprinting, with previous research outlining the value of nanocellulose fibrils and bacterial nanocelluloses for 3D bioprinting tissues such as cartilage. We have recently characterised three distinct structural formulations of pulp-derived nanocelluloses: fibrillar (NFC), crystalline (NCC) and blend (NCB), exhibiting variation in pore geometry and mechanical properties. In light of the characterisation of these three distinct entities, this study investigated whether these structural differences translated to differences in printability, chondrogenicity or biocompatibility for 3D bioprinting anatomical structures with human nasoseptal chondrocytes. Composite nanocellulose-alginate bioinks (75:25 v/v) of NFC, NCC and NCB were produced and tested for print resolution and fidelity. NFC offered superior print resolution whereas NCB demonstrated the best post-printing shape fidelity. Biologically, chondrogenicity was assessed using real time quantitative PCR, dimethylmethylene blue assays and histology. All biomaterials showed an increase in chondrogenic gene expression and extracellular matrix production over 21 days, but this was superior in the NCC bioink. Biocompatibility assessments revealed an increase in cell number and metabolism over 21 days in the NCC and NCB formulations. Nanocellulose augments printability and chondrogenicity of bioinks, of which the NCC and NCB formulations offer the best biological promise for bioprinting cartilage.

Development of a Head Acceleration Event Classification Algorithm for Female Rugby Union.

Instrumented mouthguards have been used to detect head accelerations and record kinematic data in numerous sports. Each recording requires validation through time-consuming video verification. Classification algorithms have been posed to automatically categorise head acceleration events and spurious events. However, classification algorithms must be designed and/or validated for each combination of sport, sex and mouthguard system. This study provides the first algorithm to classify head acceleration data from exclusively female rugby union players. Mouthguards instrumented with kinematic sensors were given to 25 participants for six competitive rugby union matches in an inter-university league. Across all instrumented players, 214 impacts were recorded from 460 match-minutes. Matches were video recorded to enable retrospective labelling of genuine and spurious events. Four machine learning algorithms were trained on five matches to predict these labels, then tested on the sixth match. Of the four classifiers, the support vector machine achieved the best results, with area under the receiver operator curve (AUROC) and area under the precision recall curve (AUPRC) scores of 0.92 and 0.85 respectively, on the test data. These findings represent an important development for head impact telemetry in female sport, contributing to the safer participation and improving the reliability of head impact data collection within female contact sport.

Transient changes during microwave ablation simulation : a comparative shape analysis.

Microwave ablation therapy is a hyperthermic treatment for killing cancerous tumours whereby microwave energy is dispersed into a target tissue region. Modelling can provide a prediction for the outcome of ablation, this paper explores changes in size and shape of temperature and Specific absorption rate fields throughout the course of simulated treatment with different probe concepts. Here, an axisymmetric geometry of a probe embedded within a tissue material is created, solving coupled electromagnetic and bioheat equations using the finite element method, utilizing hp discretisation with the NGSolve library. Results show dynamic changes across all metrics, with different responses from different probe concepts. The sleeve probe yielded the most circular specific absorption rate pattern with circularity of 0.81 initially but suffered the largest reduction throughout ablation. Similarly, reflection coefficients differ drastically from their initial values, with the sleeve probe again experiencing the largest change, suggesting that it is the most sensitive the changes in the tissue dielectric properties in these select probe designs. These collective characteristic observations highlight the need to consider dielectric property changes and probe specific responses during the design cycle.

Performance of exponential similarity measures in supply of commodities in containment zones during COVID-19 pandemic under Pythagorean fuzzy sets.

Following the breakout of the novel coronavirus disease 2019 (COVID-19), the government of India was forced to prohibit all forms of human movement. It became important to establish and maintain a supply of commodities in hotspots and containment zones in different parts of the country. This study critically proposes new exponential similarity measures to understand the requirement and distribution of commodities to these zones during the rapid spread of novel coronavirus (COVID-19) across the globe. The primary goal is to utilize the important aspect of similarity measures based on exponential function under Pythagorean fuzzy sets, proposed by Yager. The article aims at finding the most required commodity in the affected areas and ensures its distribution in hotspots and containment zones. The projected path of grocery delivery to different residences in containment zones is determined by estimating the similarity measure between each residence and the various necessary goods. Numerical computations have been carried out to validate our proposed measures. Moreover, a comparison of the result for the proposed measures has been carried out to prove the efficacy.

Sex differences in neck strength and head impact kinematics in university rugby union players.

Globally, over three million women participate in rugby union, yet injury prevention and training strategies are predominantly based on androcentric data. These strategies may have limited generalisability to females, given the cervical spine is more susceptible to whiplash and less adept at resisting inertial loading. A total of 53 university rugby union players (25 female, 28 male, 20.7 ± 1.8 years) had their isometric neck strength measured. Bespoke instrumented mouthguards were used to record the magnitude of head impact events in six female and seven male competitive matches. Mean female maximal isometric neck strength was 47% lower than male. Independent samples Mann-Whitney U tests showed no significant differences for peak linear head acceleration (female: median 11.7 g, IQR 7.9 g; male: median 12.5 g, IQR 7.0 g p=.23) or peak rotational head acceleration (female: median 800.2 rad·s-2, IQR 677.7 rad·s-2; male: median 849.4 rad·s-2, IQR 479.8 rad·s-2; p=.76), despite the mean male body mass being 24% greater than female. Coded video analysis revealed substantial differences in head-impact mechanisms; uncontrolled whiplash dominated >50% of all recorded female impact events and <0.5% in males. Direct head-to-ground impacts comprised 26.1% of female and 9.7% of male impacts, with whiplash occurring in 78.0% and 0.5%, respectively. Overall, the data provided in this study do not support the generalisation of male-derived training and injury-prevention data to female rugby athletes. These results suggest a considerable research effort is required to identify specific weakness of female rugby players and derive appropriate training, injury prevention and return to play protocols.Highlights Video analysis revealed substantial differences in head-impact mechanisms, with uncontrolled whiplash dominating >50% of all recorded female impact events but rarely in males.Isometric neck strength was 47% lower in female players than males.Direct head-to-ground impacts accounted for 26.1% and 9.7% of female and male impacts, with whiplash occurring in 78.0% and 0.5%, respectively.

Developing a Lung Model in the Age of COVID-19: A Digital Image Correlation and Inverse Finite Element Analysis Framework.

Pulmonary diseases, driven by pollution, industrial farming, vaping, and the infamous COVID-19 pandemic, lead morbidity and mortality rates worldwide. Computational biomechanical models can enhance predictive capabilities to understand fundamental lung physiology; however, such investigations are hindered by the lung's complex and hierarchical structure, and the lack of mechanical experiments linking the load-bearing organ-level response to local behaviors. In this study we address these impedances by introducing a novel reduced-order surface model of the lung, combining the response of the intricate bronchial network, parenchymal tissue, and visceral pleura. The inverse finite element analysis (IFEA) framework is developed using 3-D digital image correlation (DIC) from experimentally measured non-contact strains and displacements from an ex-vivo porcine lung specimen for the first time. A custom-designed inflation device is employed to uniquely correlate the multiscale classical pressure-volume bulk breathing measures to local-level deformation topologies and principal expansion directions. Optimal material parameters are found by minimizing the error between experimental and simulation-based lung surface displacement values, using both classes of gradient-based and gradient-free optimization algorithms and by developing an adjoint formulation for efficiency. The heterogeneous and anisotropic characteristics of pulmonary breathing are represented using various hyperelastic continuum formulations to divulge compound material parameters and evaluate the best performing model. While accounting for tissue anisotropy with fibers assumed along medial-lateral direction did not benefit model calibration, allowing for regional material heterogeneity enabled accurate reconstruction of lung deformations when compared to the homogeneous model. The proof-of-concept framework established here can be readily applied to investigate the impact of assorted organ-level ventilation strategies on local pulmonary force and strain distributions, and to further explore how diseased states may alter the load-bearing material behavior of the lung. In the age of a respiratory pandemic, advancing our understanding of lung biomechanics is more pressing than ever before.

Time-resolved in situ synchrotron-microCT: 4D deformation of bone and bone analogues using digital volume correlation.

Digital volume correlation (DVC) in combination with high-resolution micro-computed tomography (microCT) imaging and in situ mechanical testing is gaining popularity for quantifying 3D full-field strains in bone and biomaterials. However, traditional in situ time-lapsed (i.e., interrupted) mechanical testing cannot fully capture the dynamic strain mechanisms in viscoelastic biological materials. The aim of this study was to investigate the time-resolved deformation of bone structures and analogues via continuous in situ synchrotron-radiation microCT (SR-microCT) compression and DVC to gain a better insight into their structure-function relationships. Fast SR-microCT imaging enabled the deformation behaviour to be captured with high temporal and spatial resolution. Time-resolved DVC highlighted the relationship between local strains and damage initiation and progression in the different biostructures undergoing plastic deformation, bending and/or buckling of their main microstructural elements. The results showed that SR-microCT continuous mechanical testing complemented and enhanced the information obtained from time-lapsed testing, which may underestimate the 3D strain magnitudes as a result of the stress relaxation occurring in between steps before image acquisition in porous biomaterials. Altogether, the findings of this study highlight the importance of time-resolved in situ experiments to fully characterise the time-dependent mechanical behaviour of biological tissues and biomaterials and to further explore their micromechanics under physiologically relevant conditions. STATEMENT OF SIGNIFICANCE: Time-resolved synchrotron X-ray tomography in combination with in situ mechanical testing provided the first four-dimensional analysis of the mechanical deformation of bone and bone analogues. To unravel the interplay of damage initiation and progression with local deformation, digital volume correlation was used to map the local strain field while microstructural changes were tracked with high temporal and spatial resolution. The results highlighted the importance of fast imaging and time-resolved in situ experiments to capture the real deformation of complex porous materials to fully characterize the local strain-damage relationship. The findings are notably improving the understanding of time-dependent mechanical behaviour of bone tissue, with the potential to be extend to highly viscoelastic biomaterials and soft tissues.

Correlating Local Volumetric Tissue Strains with Global Lung Mechanics Measurements.

The mechanics of breathing is a fascinating and vital process. The lung has complexities and subtle heterogeneities in structure across length scales that influence mechanics and function. This study establishes an experimental pipeline for capturing alveolar deformations during a respiratory cycle using synchrotron radiation micro-computed tomography (SR-micro-CT). Rodent lungs were mechanically ventilated and imaged at various time points during the respiratory cycle. Pressure-Volume (P-V) characteristics were recorded to capture any changes in overall lung mechanical behaviour during the experiment. A sequence of tomograms was collected from the lungs within the intact thoracic cavity. Digital volume correlation (DVC) was used to compute the three-dimensional strain field at the alveolar level from the time sequence of reconstructed tomograms. Regional differences in ventilation were highlighted during the respiratory cycle, relating the local strains within the lung tissue to the global ventilation measurements. Strains locally reached approximately 150% compared to the averaged regional deformations of approximately 80-100%. Redistribution of air within the lungs was observed during cycling. Regions which were relatively poorly ventilated (low deformations compared to its neighbouring region) were deforming more uniformly at later stages of the experiment (consistent with its neighbouring region). Such heterogenous phenomena are common in everyday breathing. In pathological lungs, some of these non-uniformities in deformation behaviour can become exaggerated, leading to poor function or further damage. The technique presented can help characterize the multiscale biomechanical nature of a given pathology to improve patient management strategies, considering both the local and global lung mechanics.

Low-cycle full-field residual strains in cortical bone and their influence on tissue fracture evaluated via in situ stepwise and continuous X-ray computed tomography.

As a composite material, the mechanical properties of bone are highly dependent on its hierarchical organisation, thus, macroscopic mechanical properties are dictated by local phenomena, such as microdamage resulting from repetitive cyclic loading of daily activities. Such microdamage is associated with plastic deformation and appears as a gradual accumulation of residual strains. The aim of this study is to investigate local residual strains in cortical bone tissue following compressive cyclic loading, using in situ X-ray computed tomography (XCT) and digital volume correlation (DVC) to provide a deeper insight on the three-dimensional (3D) relationship between residual strain accumulation, cortical bone microstructure and failure patterns. Through a progressive in situ XCT loading-unloading scheme, localisation of local residual strains was observed in highly compressed regions. In addition, a multi-scale in situ XCT cyclic test highlighted the differences on residual strain distribution at the microscale and tissue level, where high strains were observed in regions with the thinnest vascular canals and predicted the failure location following overloading. Finally, through a continuous in situ XCT compression test of cycled specimens, the full-field strain evolution and failure pattern indicated the reduced ability of bone to plastically deform after damage accumulation due to high number of cyclic loads. Altogether, the novel experimental methods employed in this study, combining high-resolution in situ XCT mechanics and DVC, showed a great potential to investigate 3D full-field residual strain development under repetitive loading and its complex interaction with bone microstructure, microdamage and fracture.

Soft Robotic Surrogate Lung.

Previous artificial lung surrogates used hydrogels or balloon-like inflatable structures without reproducing the alveolar network or breathing action within the lung. A physiologically accurate, air-filled lung model inspired by soft robotics is presented. The model, soft robotic surrogate lung (SRSL), is composed of clusters of artificial alveoli made of platinum-cured silicone, with internal pathways for air flow. Mechanical tests in conjunction with full-field image and volume correlation techniques characterize the SRSL behavior. SRSLs enable both healthy and pathological lungs to be studied in idealized cases. Although simple in construction, the connected airways demonstrate clearly the importance of an inflatable network for capturing basic lung behavior (compared to more simplified lung surrogates). The SRSL highlights the potentially damaging nature of local defects caused by occlusion or overdistension (present in conditions such as chronic obstructive pulmonary disease). The SRSL is developed as a potential upgrade to conventional surrogates used for injury risk predictions in trauma. The deformation of the SRSL is evaluated against blast trauma using a shock tube. The SRSL was compared to other conventional trauma surrogate materials and showed greatest similarity to lung tissue. The SRSL has the potential to complement conventional biomechanical studies and reduce animal use in basic biomechanics studies, where high severity protocols are used.

Evaluating Primary Blast Effects In Vitro.

Exposure to blast events can cause severe trauma to vital organs such as the lungs, ears, and brain. Understanding the mechanisms behind such blast-induced injuries is of great importance considering the recent trend towards the use of explosives in modern warfare and terrorist-related incidents. To fully understand blast-induced injury, we must first be able to replicate such blast events in a controlled environment using a reproducible method. In this technique using shock tube equipment, shock waves at a range of pressures can be propagated over live cells grown in 2D, and markers of cell viability can be immediately analyzed using a redox indicator assay and the fluorescent imaging of live and dead cells. This method demonstrated that increasing the peak blast overpressure to 127 kPa can stimulate a significant drop in cell viability when compared to untreated controls. Test samples are not limited to adherent cells, but can include cell suspensions, whole-body and tissue samples, through minor modifications to the shock tube setup. Replicating the exact conditions that tissues and cells experience when exposed to a genuine blast event is difficult. Techniques such as the one presented in this article can help to define damage thresholds and identify the transcriptional and epigenetic changes within cells that arise from shock wave exposure.

On the behaviour of lung tissue under tension and compression.

Lung injuries are common among those who suffer an impact or trauma. The relative severity of injuries up to physical tearing of tissue have been documented in clinical studies. However, the specific details of energy required to cause visible damage to the lung parenchyma are lacking. Furthermore, the limitations of lung tissue under simple mechanical loading are also not well documented. This study aimed to collect mechanical test data from freshly excised lung, obtained from both Sprague-Dawley rats and New Zealand White rabbits. Compression and tension tests were conducted at three different strain rates: 0.25, 2.5 and 25 min-1. This study aimed to characterise the quasi-static behaviour of the bulk tissue prior to extending to higher rates. A nonlinear viscoelastic analytical model was applied to the data to describe their behaviour. Results exhibited asymmetry in terms of differences between tension and compression. The rabbit tissue also appeared to exhibit stronger viscous behaviour than the rat tissue. As a narrow strain rate band is explored here, no conclusions are being drawn currently regarding the rate sensitivity of rat tissue. However, this study does highlight both the clear differences between the two tissue types and the important role that composition and microstructure can play in mechanical response.

CD43Lo classical monocytes participate in the cellular immune response to isolated primary blast lung injury.

BACKGROUND: Understanding of the cellular immune response to primary blast lung injury (PBLI) is limited, with only the neutrophil response well documented. Moreover, its impact on the immune response in distal organs remains poorly understood. In this study, a rodent model of isolated primary blast injury was used to investigate the acute cellular immune response to isolated PBLI in the circulation and lung, including the monocyte response, and investigate distal subacute immune effects in the spleen and liver 6 hours after injury. METHODS: Rats were subjected to a shock wave (~135 kPa overpressure, 2 ms duration) inducing PBLI or sham procedure. Rat physiology was monitored, and at 1, 3, and 6 hours thereafter, blood, lung, and bronchoalveolar lavage fluid (BALF) were collected and analyzed by flow cytometry, enzyme-linked immunosorbent assay, and histologic examination. In addition, at 6 hours, spleen and liver were collected and analyzed by flow cytometry. RESULTS: Lung histology confirmed pulmonary barotrauma and inflammation. This was associated with rises in CXCL-1, interleukin 6 (IL-6), tumor necrosis factor α and albumin protein in the BALF. Significant acute increases in blood and lung neutrophils and CD43Lo/His48Hi (classical) monocytes/macrophages were detected. No significant changes were seen in blood or lung "nonclassical" monocyte and in natural killler, B, or T cells. In the BALF, significant increases were seen in neutrophils, CD43Lo monocyte-macrophages and monocyte chemoattractant protein-1. Significant increases in CD43Lo and Hi monocyte-macrophages were detected in the spleen at 6 hours. CONCLUSION: This study reveals a robust and selective response of CD43Lo/His48Hi (classical) monocytes, in addition to neutrophils, in blood and lung tissue following PBLI. An increase in monocyte-macrophages was also observed in the spleen at 6 hours. This profile of immune cells in the blood and BALF could present a new research tool for translational studies seeking to monitor, assess, or attenuate the immune response in blast-injured patients.

Prolonged but not short-duration blast waves elicit acute inflammation in a rodent model of primary blast limb trauma.

BACKGROUND: Blast injuries from conventional and improvised explosive devices account for 75% of injuries from current conflicts; over 70% of injuries involve the limbs. Variable duration and magnitude of blast wave loading occurs in real-life explosions and is hypothesised to cause different injuries. While a number of in vivo models report the inflammatory response to blast injuries, the extent of this response has not been investigated with respect to the duration of the primary blast wave. The relevance is that explosions in open air are of short duration compared to those in confined spaces. METHODS: Hindlimbs of adult Sprauge-Dawley rats were subjected to focal isolated primary blast waves of varying overpressure (1.8-3.65kPa) and duration (3.0-11.5ms), utilising a shock tube and purpose-built experimental rig. Rats were monitored during and after the blast. At 6 and 24h after exposure, blood, lungs, liver and muscle tissues were collected and prepared for histology and flow cytometry. RESULTS: At 6h, increases in circulating neutrophils and CD43Lo/His48Hi monocytes were observed in rats subjected to longer-duration blast waves. This was accompanied by increases in circulating pro-inflammatory chemo/cytokines KC and IL-6. No changes were observed with shorter-duration blast waves irrespective of overpressure. In all cases, no histological damage was observed in muscle, lung or liver. By 24h post-blast, all inflammatory parameters had normalised. CONCLUSIONS: We report the development of a rodent model of primary blast limb trauma that is the first to highlight an important role played by blast wave duration and magnitude in initiating acute inflammatory response following limb injury in the absence of limb fracture or penetrating trauma. The combined biological and mechanical method developed can be used to further understand the complex effects of blast waves in a range of different tissues and organs in vivo.